https://www.buyflowmeters.com Latest Products Mon, 18 May 2026 09:04:50 +0530 en-us https://www.buyflowmeters.com https://www.buyflowmeters.com/level-switches-level-sensors.htm https://www.buyflowmeters.com/level-switches-level-sensors.htm Sat, 13 Nov 2021 00:00:00 +0530 https://www.buyflowmeters.com/cable-float-level-switch.htm https://www.buyflowmeters.com/cable-float-level-switch.htm Sat, 04 Jan 2025 00:00:00 +0530 Cable Float Level Switch is made from resistant polypropylene. It is durable, economical, maintenance free & easy to install. And spe-cially designed for multiple point level detection in liquids. Its hermetic sealed, polypropylene body makes it suitable for sewage application. The switching ON or OFF differential is adjusted by a counterweight on the cable. The switches will transmit an ON or OFF contact signal output when the float rises and turns upwards. The switch contains a metal ball that can side as the float position changes. Application: Raw Water, Sewage Open or Close Pits, ETP, STP, Waste Water, pump dry run protection https://www.buyflowmeters.com/side-mounted-level-switch.htm https://www.buyflowmeters.com/side-mounted-level-switch.htm Sat, 04 Jan 2025 00:00:00 +0530 Side Mounted Level Switch are designed for use in tanks and vessels for indicating or controlling the level of a liquid. They work well as high or low level controls. Its operating princi-pal is magnetic & wetted part construction in SS. When the float magnet moves close to the switch stem, the float magnet repels the switch magnet which either opens or closes the Electrical circuit. The contact can be used to operate a pump or any device connected in series to it. These switches can either be supplied in weather proof cast aluminium switch housing. Features : Rugged, Economical point level sensing. Low & high temp. Easy installation & operation SS wetted part https://www.buyflowmeters.com/magnetic-float-level-switch.htm https://www.buyflowmeters.com/magnetic-float-level-switch.htm Thu, 06 Feb 2025 00:00:00 +0530 Magnetic Float Level Switch units are housed tightly in SS or PP, and the permanent magnet is sealed into the middle of the specified float ball. The float up and down at the specified po-sition by graduating rings. When the float internal magnet approaches the reed switch, it will actuate the reed switch contact point to create an open or close cir-cuit. Sensors are available in SS/PP moc & made in different lengths for single or multiple levels sensing of liquids. SS are used in food grade and high temperature application. Application : Diesel, generator facilities, petrochemical, Condensate, acids, chemical, beverages, milk, juices, oil, cooling tower, etc. Features : Multiple point level switches in single level switch. Employing to power actuate the reed switch requires no power These float level switches are more cost effective than other level switches in terms of multiple points. The housing protection is at least IP65. The reed switch and lead wire are isolated with liquids absolutely. Magnetic Float Level Switch units are housed tightly in SS or PP, and the permanent magnet is sealed into the middle of the specified float ball. The float up and down at the specified po-sition by graduating rings.When the float internal magnet approaches the reed switch, it will actuate the reed switch contact point to create an open or close cir-cuit. Sensors are available in SS/PP moc & made in different lengths for single or multiple levels sensing of liquids. SS are used in food grade and high temperature application.Features: Multiple point level switches in single level switch Employing to power actuate the reed switch requires no power These float level switches are more cost effective than other level switches in terms of multiple points The housing protection is at least 1P65 The reed switch and lead wire are isolated with liquids absolutely. Applications: Diesel, Generator facilities, Petrochemical, Condensate, acids, chemical, beverages, milk, juices, oil, cooling tower etc https://www.buyflowmeters.com/flow-meters.htm https://www.buyflowmeters.com/flow-meters.htm Sat, 23 Oct 2021 00:00:00 +0530 https://www.buyflowmeters.com/submersible-level-transmitter.htm https://www.buyflowmeters.com/submersible-level-transmitter.htm Sat, 04 Jan 2025 00:00:00 +0530 Industrial Submersible Level Transmitter probe are compact device for continuous level measurement of non-aggressive liquids (without solid impurities) in non-pressurised tanks, vessels, reservoirs, sumps & tanks. Probe consists highly stable piezo resistive sensor and precise evaluation electronics in stainless steel housing. Probe is sealed, thus protect its pressure from mechanical damage. A cable is integral of probe, consists of 2 wires & a capillary tube comes in various range as per requirement. Other end of capillary tube is kept open to atmosphere for air to flow freely(for atm. pressure compensation). Transmitter is simply hanged inside tank through its cable. The sensor transducer is enclosed in a liquid tight SS316 hosing and assembled to a liquid proof cable. Due to liquid static pressure inside tank, transducer signal is converted into 4-20 mA( 2 wire) output is correspond to liquid level accurately. The change in level is detected by comparing the pressure difference between pressure of water column over the probe & atmospheric through capillary tube. This generates a output signal which is converted into 4r20mA (2-wire) signal. Features : Long measuring range, customised length. Extension Cable, Flanged model IP 68 sealed probe of SS Easy to install, operate, no moving part, high accurate. Special polyurethane cable ensuring more flexible & endurable. Reliable, Economical. https://www.buyflowmeters.com/magnetic-float-level-transmitter.htm https://www.buyflowmeters.com/magnetic-float-level-transmitter.htm Sat, 04 Jan 2025 00:00:00 +0530 The magnetic float level transmitter devices using the principles of buoyancy and magnetism to generate a changing electrical output in response to the rise and fall of the float on the sensing guide rod. The magnetic float level transmitter provides a 3-wire resistance output or can be equipped with an appropriate level transmitter to provide a 4-20mA analog signal indicating liquid level. The sensing guide rod includes a series of reed switches along the entire measuring length. Placement of reed switches provides either of two possible measuring resolutions. As the float is raised or lowered by the liquid level, the sensing rod will induce a resistance output, which is directly proportional to the liquid level. The Magnet Float Level Transmitter is a sturdy, reliable and durable device that is applicable across most industries. Features : Reliable, Maintenance free. SS or PP construction Easy to install & operate Explosion Proof certificate available https://www.buyflowmeters.com/helical-flow-meter.htm https://www.buyflowmeters.com/helical-flow-meter.htm Thu, 06 Feb 2025 00:00:00 +0530 LFIA developed and produced Digital Water Flow Meter specially for Liquid dispensing industries, water dispensing industries use plastic turbines flow meter its k factor change with flow rate so for solution we developer helical rotor plastic flow meter with same pulse k factor for full range also provide very good accuracy and repeatability in full range of measurement, Helical flow meters are positive displacement meters with very fa-vourable low pressure drop behaviour, therefore perfectly suited for the flow measurement of very high viscosity fluids. Due to which measuring range, high accuracy and resolution he-lical flow meters are an excellent choice for adhesive dispense systems, as well as batching systems for various fluids.Features High Accuracy, Pressure up to 25 bar, compared with other positive displacement meters, High resolution, Resistant to corrosion by advanced materials and bearings Application Light and heavy fuel oil,Petrochemical products,Fat and oils with varying viscosities and fluids,Water / glycol mixtures,Water dispensing, tea /coffee/juice and other food liquid measurement https://www.buyflowmeters.com/handheld-ultrasonic-flow-meter.htm https://www.buyflowmeters.com/handheld-ultrasonic-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 Handled Ultrasonic Flow Meter utilizes two transducers that function as both ultrasonic transmitters and receivers. The transducers are clamped on the outside of a closed pipe at a distance from each other. The transducers can be mounted in V method in which case the ultrasound transverses the pipe twice, or W method in which case the ultrasound transverses the pipe four times, or in Z method in which case the transducer are mounted on opposite sides of the pipe and the ultrasound transverses the pipe only once. The selection of mounting method depends on pipe and liquid characteristics. When flow meter works, two transducers transmit and receive the ultrasonic signal which travels firstly downstream and then travels upstream. Because ultra sound travels faster downstream than upstream, there will be a difference of time of flight (delta t). When the flow is still, the time difference (delta t) is zero. Therefore, as long as we know the time of flight both downstream and upstream, we can work out the time difference and the flow velocity (V) and flow v (Q) the follow-ing formula.Application: Raw Water, cooling water, DM water, hot water, chemicals, HVAC energy measurement system, beverages, food, pharmaceutical, power plants etc Advantages: No moving parts Sensor clamp outside the pipe, no need to cut the lines Disadvantages: Oil or corroded pipes may impede acoustic signal Too much aeration or turbulence can destroy signal https://www.buyflowmeters.com/ultrasonic-clamp-on-flow-meter.htm https://www.buyflowmeters.com/ultrasonic-clamp-on-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 The TFX-500w transit time ultrasonic flow meter measures volumetric flow of clean water in pipes 10 in. or smaller. By clamping on the outside of the pipe, the ultrasonic meter installs without cutting or tapping the pipe. APPLICATION The TFX-500w meter is well suited for building automation, water distribution and wastewater collection in new and retrofit applications. In addition to having lower installation costs than an inline flow meter, the TFX-500w meter can be installed while the system continues to operate without interruption.The TFX-500w meter is suitable for:• Potable water• Reclaimed water• Chiller water• Boiler feed water• Make-up water• Condenser water• Condensate OPERATION Transit time flow meters use two transducers that function as both ultrasonic transmitters and receivers. The flow meters operate by alternately transmitting and receiving a frequency-modulated burst of sound energy between the two transducers. The burst is first transmitted in the direction of fluid flow and then against fluid flow. Since sound energy in a moving liquid is carried faster when it travels in the direction of fluid flow (downstream) than it does when it travels against fluid flow (upstream), a differential in the times of flight will occur. The sound’s time-of-flight is accurately measured in both directions and the difference in time-of-flight calculated.   https://www.buyflowmeters.com/mechanical-diesel-flow-meter.htm https://www.buyflowmeters.com/mechanical-diesel-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 Mechanical Diesel Flow Meter are used for flow measurement of low, medium viscosity fluids such as diesel, fuel, lubricant oil and other special fluids compatible with the constructions material.Oval gear flow meters are a type of positive displacement meter. As liquid through the meter, pair of oval shaped gears is forced to rotate by the flow of the liquid. These gears mesh together & force a finite amount of liquid through the meter. A sensor or mechanical drive detects the rotation of the gears to determine the displaced volume of liquid. The faster the flow rate, the faster the gear turns.The Oval fear flow meter comprises oval - shaped, geared rotors which rotate within a housing of specified geometry. Fluid differential pressure causes the inter-meshing gears to rotate, trapping a ''pocket'' of fluid between the gear and the outer housing and subsequently emp-tying the fluid pocket into the downstream flow. Capillary action of the metered fluid forms a liquid seal. Each pocket holds a precise and known volume of fluid so counting the pocket frequency gives a mea-surement of the volumetric flow rate. This is typically achieved by embedding magnets in the rotors, which then actuate a reed switch or provide a pulse output as they rotate and thus flow is measured elec-tronically. https://www.buyflowmeters.com/digital-diesel-flow-meter.htm https://www.buyflowmeters.com/digital-diesel-flow-meter.htm Thu, 06 Feb 2025 00:00:00 +0530 Digital Diesel Flow Meter are used for flow measurement of low, medium viscosity fluids such as diesel, fuel, lubricant oil and other special fluids compatible with the constructions materi-al. Electronic card with microprocessor enables accurate LCD dis-play and working calibration of the flow meter.Oval gear flow meters are a type of positive displacement meter. As liquid through the meter, pair of oval shaped gears is forced to rotate by the flow of the liquid. These gears mesh together & force a finite amount of liquid through the meter. A sensor or mechanical drive detects the rotation of the gears to determine the displaced volume of liquid. The faster the flow rate, the faster the gear turns.The Oval fear flow meter comprises oval - shaped, geared rotors which rotate within a housing of specified geometry. Fluid differential pressure causes the inter-meshing gears to rotate, trapping a `pocket' of fluid between the gear and the outer housing and subsequently emp-tying the fluid pocket into the downstream flow. Capillary action of the metered fluid forms a liquid seal.Each pocket holds a precise and known volume of fluid so counting the pocket frequency gives a measurement of the volumetric flow rate. This is typically achieved by embed-ding magnets in the rotors, which then actu-ate a reed switch or provide a pulse output as they rotate and thus flow is measured electronically.Feaures: Easy maintenance Low pressure drop   Application: Diesel Oil Fuel Digital Diesel Flow Meter are used for flow measurement of low, medium viscosity fluids such as diesel, fuel, lubricant oil and other special fluids compatible with the constructions materi-al. Electronic card with microprocessor enables accurate LCD dis-play and working calibration of the flow meter.Oval gear flow meters are a type of positive displacement meter. As liquid through the meter, pair of oval shaped gears is forced to rotate by the flow of the liquid. These gears mesh together & force a finite amount of liquid through the meter. A sensor or mechanical drive detects the rotation of the gears to determine the displaced volume of liquid. The faster the flow rate, the faster the gear turns.The Oval fear flow meter comprises oval - shaped, geared rotors which rotate within a housing of specified geometry. Fluid differential pressure causes the inter-meshing gears to rotate, trapping a `pocket' of fluid between the gear and the outer housing and subsequently emp-tying the fluid pocket into the downstream flow. Capillary action of the metered fluid forms a liquid seal.Each pocket holds a precise and known volume of fluid so counting the pocket frequency gives a measurement of the volumetric flow rate. This is typically achieved by embed-ding magnets in the rotors, which then actu-ate a reed switch or provide a pulse output as they rotate and thus flow is measured electronically.Feaures: Easy maintenance Low pressure drop Application: Diesel Oil Fuel https://www.buyflowmeters.com/turbine-flow-meter.htm https://www.buyflowmeters.com/turbine-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 A turbine flow meter is an instrument used to measure the flow rate and volume of a liquid or gaseous fluid. It works on the principle of turbine rotation. A turbine flow meter consists of a pipe or fluid channel with turbine blades inside, and as the fluid passes through the channel, the kinetic energy of the fluid pushes the turbine blades and causes them to rotate. The measurement accuracy of a turbine flow meter usually depends on several factors, including the following: Sensor accuracy: The accuracy of the sensor’s detection of the turbine blade rotation will directly affect the accuracy of the flow rate and flow measurement. Fluid Characteristics: Turbine flow meters are sensitive to the nature of the fluid (e.g., viscosity, temperature, and density), so corrections or compensations may be required under specific fluid conditions. Cleanliness: The presence of solid particles or impurities in the fluid may affect the rotation of the turbine blades, thereby affecting measurement accuracy. Installation and calibration: Proper installation and regular calibration are key factors in ensuring the accuracy of a turbine flow meter. https://www.buyflowmeters.com/magnetic-flow-meter.htm https://www.buyflowmeters.com/magnetic-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 A magnetic flow meter (mag meter, electromagnetic flow meter) is a transducer that measures fluid flow by the voltage induced across the liquid by its flow through a magnetic field. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. The magnetic flow meter requires a conducting fluid, for example, water that contains ions, and an electrical insulating pipe surface, for example, a rubber-lined steel tube. If the magnetic field direction were constant, electrochemical and other effects at the electrodes would make the potential difference difficult to distinguish from the fluid flow induced potential difference. To show this in modern magnetic flowmeters, the magnetic field is constantly reversed, cancelling out the electrochemical potential difference, which does not change direction with the magnetic field. This however prevents the use of permanent magnets for magnetic flowmeters. Application : Waste Water, Slurry, Raw Water, Sewage, Wood Pulp, chemicals, Food processing, fertilizer, sugar, beverages, pharmaceutical Industries. Features : Integral or remote transmitter High long term stability and reliability Coil assembly in hermetically sealed welded construction https://www.buyflowmeters.com/vibration-fork-level-switch.htm https://www.buyflowmeters.com/vibration-fork-level-switch.htm Wed, 29 Apr 2026 00:00:00 +0530 Vibration Fork Level Switch is used to drive the vibration fork and feedback signal, when produces the resonation on the fork. When the fork comes into contact with material, the fork will release some frequency signal. It will be converted into the output to the signal. The vibrating frequency causes tuning forks to vibrate free inside the tank when forks are not covered with any media. Once the media covers the tuning forks, it causes damp-ing of vibrations. The damping effect of vi-brating forks is sensed by an equal circuitry which in turns gives an output electronic signal which in turn actuates a relay. The Vibration fork level switch can be widely applied to detect the min. and max. Level in tanks, silos and hoppers filled with materials of different applications. Application : Powdered Milk, Coffee Powder, Tea, Salt, Flour, Animal Foods, Peanuts, Powdered Cellulose, Granules, Oil, Drink & Beverages, Rice, etc. Features : Suitable for the highly dusty environment. No frequent calibration required easy to use and durable design. Suitable for liquid, powder and solid application. SPDT relay Output https://www.buyflowmeters.com/displacer-type-level-switch.htm https://www.buyflowmeters.com/displacer-type-level-switch.htm Wed, 29 Apr 2026 00:00:00 +0530 Displacer level switch is used where High temperature and High Pressure liquid level control is required. It gives potentional free 5A@250VAC 1C/0 or 2C/0 contacts for direct interface to Solinoide Valves, Relays Contactors, and Panel Lamps etc.Application : Water, Foaming or surging liquids, oils, large storage tanks, juices, etc. Features : Displacers adjustable at any point along the suspension cable Flanged or threaded mounting available Easy installation, economical, long range. Field adjustable set point and switch differential. Single or multiple level sensing. Displacer Type Level Switch offer the indus-trial user a wide choice of alarm and control con-figurations. Each unit utilizes a simple buoyancy principle and are well suited for simple or com-plex applications, such as foaming or surging liq-uids. Displacer type level measurement units are wide differential units calibrated to actuate as a liquid level reaches a given displacer and to de-actuate when the level reaches a second displacer. Single stage, wide differential displacer switch-es are factory calibrated yet field adjustable to operate over a wide level differential band.  Application: Water, Foaming or surging liquids, oils large storage tanks, juices etc Operating Principle: Suitable for the highly dusty environment No frequent calibration required easy to use and durable design Suitable for liquid, powder and solid application SPDT relay output Features: Displacers adjustable at any point along the suspension cable Flanged or threaded mounting available Easy installation, economical, long range Field adjustable set point and switch differential Single or multiple level sensing https://www.buyflowmeters.com/capacitance-level-switch.htm https://www.buyflowmeters.com/capacitance-level-switch.htm Wed, 29 Apr 2026 00:00:00 +0530 Capacitance Level Transmitter is a compact, low cost, level transmitter with 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tanks or storage vessels. Mea-suring range is 0.25 to 3 m for rod probe version. The probe forms an electrical capacitor with the surrounding metal contained wall, or with auxiliary reference probe. With the vessel empty, an initial ca-pacitances exists between the electrode And the metal well or the aux-iliary reference probe. When the probe become covered with material to be measured the capaci-tances will increase and the change will be measured and covered into an analogue (4-20 mil) output signal proportional to the change. Rod or flexible cable can be used for various conductive or non conductive Liquids.Application : Liquids, syrups, solids, powder, cement, sugar, flour, power milk, rice, granules, chemical, etc. Features : Time delay function from 0-30 seconds. IP 65 Protection. Easy installation, durable, rugged Suitable for sticky application, solids, powder No moving parts https://www.buyflowmeters.com/wire-probe-sensor.htm https://www.buyflowmeters.com/wire-probe-sensor.htm Sat, 04 Jan 2025 00:00:00 +0530 Wire probe clearly structured measurement menu for volume flow and parallel determination of air velocity, volume flow and air temperature. Wire Probe with the compatible testo multifunction measuring instrument (please order separately) to determine air velocity, volume flow and air temperature. The probe is equipped with a telescope, which can be extended to a maximum length of 0.85 m. To ensure accurate measurement results, air density compensation is carried out via the integrated absolute pressure measurement.The clearly structured measurement menu for volume flow makes the measuring instrument intuitive to operate. The volume flow is precisely calculated thanks to convenient input of the size and geometry of the duct cross-section. Timed and multi-point mean calculation, average volume flow, current reading and min./max. values are displayed in the measuring instrument.Integrated sensor protection: when you are not using the hot wire probe, the rotatable protective cap protects the air velocity sensor from dirt and mechanical stress. https://www.buyflowmeters.com/glass-tubular-level-gauge.htm https://www.buyflowmeters.com/glass-tubular-level-gauge.htm Sat, 04 Jan 2025 00:00:00 +0530 Tubular Level Gauges are designed to view liquid levels using clear or red line Borosilicate (Pyrex) tubing to view liquid levels. All valves use a stuffing box configuration to seal the glass tube, and have a ball check shutoff to prevent loss of vessel contents in case of glass failure. Application : Liquid,, Diesel, Oil, Condensate , Chemicals, Beverages, acids, etc. Features Continuous level indication without power supply Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight. Economical Made in various MOC. https://www.buyflowmeters.com/magnetic-bi-colour-level-gauge.htm https://www.buyflowmeters.com/magnetic-bi-colour-level-gauge.htm Sat, 04 Jan 2025 00:00:00 +0530 Magnetic Bi-Colour Level Gauge float moves with level in external chamber (cage) which is coupled with the tank. Indication display mechanism does not come in direct con-tact with the liquid media. Special designed cylindrical magnetic float as per density of liquid. Magnetically cou-pled follower capsule or roller or ball indicates the liquid level externally. Indicator system is consists of bi-colour rollers equipped with magnets mounted on rail inside the housing. As the level starts rising or falling magnetic float also travels with liquid level in non-magnetic chamber. The magnetic in-teraction between magnets in float and Ed-colour rollers causes each roller to rotate 180o. These red / white rollers are visible from long distance, giving a good visual indi-cation visibility. Models are available with side & top mounting designs. Level transmitter (Optiona): Transmitter units are available with 4 - 20 mA output. Transmitter rod is clamped outside the chamber.  Level Switch: Level switches are available for con-trolling & alarm. Level switches are adjustable, mounted outside the chamber by adjustable clamp arrangementApplication : Liquid, Acids, machines, food, Diesel, Oil, Condensate, Chemicals, Beverages, etc. Features Visible level changes are shown by the flag display. Compact & easy to install. Rugged, Life long, good visibility. Optional – Level switches for alarm or controlling. Optional – Level transmitters with 4 – 20 mA signal output. SS304, SS 316 & PP version for acid applications. https://www.buyflowmeters.com/float-chord-level-indicator.htm https://www.buyflowmeters.com/float-chord-level-indicator.htm Wed, 29 Apr 2026 00:00:00 +0530 WE LFCE are manufacturer , Exporter of Float and Board Level Gauge. Which is mainly used in Storage tanks ans vessels to see the Liquid level in the tank. This type of level gauge will have direct contact the process fluids. Float and Board level gauge consists on Float, Scale Board, Pulley arrangemnts. This instrument is an absolutely reliable and accurate system for liquid level measurement in tall overhead tanks. This type of Float & Board type Level Gauge basically work on the principle of buoyancy. The float is well connected to the counter weight along with a pointer through flexible wire ropes. https://www.buyflowmeters.com/gprs-wireless-based-automation-system.htm https://www.buyflowmeters.com/gprs-wireless-based-automation-system.htm Mon, 15 Nov 2021 00:00:00 +0530 Features  Real time data collection from connected equipment’s.  Controlling and monitoring of STP, ETP, WTP, RO and UF plant from central scada Via GPRS gateway.  User can remotely configure the PLC with the help of web graphics at central scada.  User can remotely calibrate the analyser with the help of web graphics at central scada.  User can monitor the parameter locally through HMI and remotely through central web scada.  User can control and monitor through mobile based application on mobile.  User can view the reports as per requirement. https://www.buyflowmeters.com/mcc-plc-automation-system.htm https://www.buyflowmeters.com/mcc-plc-automation-system.htm Mon, 15 Nov 2021 00:00:00 +0530 https://www.buyflowmeters.com/electromagnetic-flow-meter.htm https://www.buyflowmeters.com/electromagnetic-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 Electromagnetic flow meters (or magmeters) are a type of velocity or volumetric flow meter that operate pursuant to Faraday’s law of electromagnetic induction – which states that a voltage will be induced when a conductor moves through a magnetic field. Magmeters can detect the flow rate of conductive fluids only. Early magmeter designs required a minimum fluidic conductivity of 1-5 microsiemens per centimeter for their operation. The newer designs have reduced that requirement a hundredfold to between 0.05 and 0.1.   An electromagnetic flowmeter consists of a non-magnetic pipe that is lined with an insulating material. A pair of magnetic coils is situated as shown in Figure 1, and a pair of electrodes penetrates the pipe and its lining.   If a conductive fluid flows through a pipe of diameter (D) through a magnetic field density (B) generated by the coils, the amount of voltage (E) developed across the electrodes--as predicted by Faraday's law--will be proportional to the velocity (V) of the liquid. Because the magnetic field density and the pipe diameter are fixed values, they can be combined into a calibration factor (K) and the equation reduces to:E = KV https://www.buyflowmeters.com/compressed-air-flow-meter.htm https://www.buyflowmeters.com/compressed-air-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 Compressed Air Flow Meters generally uses more electricity than any other type of equipment, and accounts for as much as a third of the energy usage in an industrial facility. Achievers Air Flow Meters help identify leaks in compressor systems, track overall usage to improve plant efficiency, and help departments reduce consumption. This can save huge money each month in large industrial applications. For instance, the compressed air flow meter can be used with energy management systems to help determine the optimal number of compressor units that need to be in operation at any given time, this helps to meet the demand of various departments and processes. Furthermore, Compressed air flow meters are sensitive enough to determine leaks. Features of Compressed Air Flow Meter: High Durability Robust Structure Resistance to Adverse Conditions Easy Installation Low Maintenance Cost High Accurac https://www.buyflowmeters.com/dg-consumption-flow-meter.htm https://www.buyflowmeters.com/dg-consumption-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 Diesel generators are usually equipped with a flat tank, which makes fuel control using level sensors problematic and less accurate. At the same time, fuel monitoring with flow meter provides accurate data on instant, total and differential fuel consumption, and also allows calculating level in a tank and ensures timely refueling. flowmeters monitor engine operation time in Idling, Optimal, Overload modes and allow accurate accounting of engine hours. Reporting on fuel consumption and engine operating conditions helps to identify need for replacement of consumables in a timely manner, which optimizes and reduces repair and maintenance costs. https://www.buyflowmeters.com/gas-flow-meter.htm https://www.buyflowmeters.com/gas-flow-meter.htm Thu, 06 Feb 2025 00:00:00 +0530 A flow meter is a precision instrument that measures a pipe's gas flow rate (or liquid flow). While there are four main meter styles for flow measurement, here are three characteristics to determine flow: Positive displacement meters collect a fixed fluid volume, then release and refill the gas or liquid Waste Water, Slurry, Raw Water, Sewage, Wood Pulp, chemicals, Food processing, fertilizer, sugar, beverages, pharmaceutical Industries. Features Integral or remote transmitter High long term stability and reliability Coil assembly in hermetically sealed welded construction https://www.buyflowmeters.com/online-flow-meter.htm https://www.buyflowmeters.com/online-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 Electromagnetic flow meters (also called mag meters, electromag meters or magnetic flow meters), are volumetric flow meters that use electromagnetic induction to measure liquid velocity. This method of measurement is highly accurate at measuring water-based fluids as they pass through a pipe. Electromagnetic flow meters feature an obstruction-free design which eliminates flow impediment and operate with electrodes embedded on opposite sides of the flow tube or sensor to pick up the signal. Mag meters perform extremely well in many municipal and processing applications and have become the meter of choice for measuring conductive liquids such as water or slurry. Finally, mag meters do not have any moving parts, so there is minimal need for maintenance or replacement. Accuracy over a wide flow range can be as good as ± 0.5% of flow rate or better. https://www.buyflowmeters.com/open-channel-flow-meter.htm https://www.buyflowmeters.com/open-channel-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 Open Channel Flow Meter is a high accuracy flow instrument which is used the principle of ultrasonic measuring Venturi canal or Parshall flume. It measure the time of reflected back after sound wave contact to channel water , then according to the formula figure out channel flow, it can provide flow output, display flow velocity and total flow.Application Area: Water and wastewater treatment: pump house, collecting well, biochemistry reaction tank, settling tank etc. Power, mine, grout pool, coal slurry tank, butter storage tank, stock ground or Part of the mobile device control etc. River Water, Agriculture, Supply Water, etc. https://www.buyflowmeters.com/digital-water-flow-meter.htm https://www.buyflowmeters.com/digital-water-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 LFIA developed and produced Digital Water Flow Meter specially for Liquid dispensing industries, water dispensing industries use plastic turbines flow meter its k factor change with flow rate so for solution we developer helical rotor plastic flow meter with same pulse k factor for full range also provide very good accuracy and repeatability in full range of measurement, Helical flow meters are positive displacement meters with very fa-vourable low pressure drop behaviour, therefore perfectly suited for the flow measurement of very high viscosity fluids. Due to which measuring range, high accuracy and resolution he-lical flow meters are an excellent choice for adhesive dispense systems, as well as batching systems for various fluids. Features: High Accuracy Pressure up to 20 bar Compared with other positive displacement meters High resolution Resistant to corrosion by advanced materials and bearings https://www.buyflowmeters.com/vortex-flow-meter.htm https://www.buyflowmeters.com/vortex-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 A vortex meter is a type of volumetric flow meter that makes use of a natural phenomenon that occurs when a liquid flows around a bluff object. Vortex flow meters operate under the vortex shedding principle, where vortices (or eddies) are shed alternately downstream of the object. Application Waste Water, Slurry, Raw Water, Sewage, Wood Pulp, chemicals, Food processing, fertilizer, sugar, beverages, pharmaceutical Industries. Features Integral or remote transmitter High long term stability and reliability Coil assembly in hermetically sealed welded construction https://www.buyflowmeters.com/level-transmitters.htm https://www.buyflowmeters.com/level-transmitters.htm Sat, 23 Oct 2021 00:00:00 +0530 https://www.buyflowmeters.com/level-gauges.htm https://www.buyflowmeters.com/level-gauges.htm Fri, 05 Nov 2021 00:00:00 +0530 https://www.buyflowmeters.com/smart-displacement-level-transmitter.htm https://www.buyflowmeters.com/smart-displacement-level-transmitter.htm Tue, 11 Feb 2025 00:00:00 +0530 Smart Displacement Type Level Transmitter is designed to sense Liquid level, Interface and Specific gravity. The output of the Instrument is proportional and is designed to measure and transmit electrical signal proportional to changes in Liquid level or Specific Gravity.The LFIA series measures changes in Liquid Level, Specific Gravity or Interface Level and transmits a current output signal proportional to the change in the process parameter. The change in the process parameter causes a change in the displacer position, which is transferred to the Torque Tube producing a rotary motion. This rotary motion is transferred through bellow to lever assembly that is supported by flexure strips. Magnets attached to the lever assembly move past a Hall effect position sensor that converts the magnetic field signal to an electrical 4- 20mAsignal. https://www.buyflowmeters.com/magnetic-bi-colour-level-transmitter.htm https://www.buyflowmeters.com/magnetic-bi-colour-level-transmitter.htm Sat, 04 Jan 2025 00:00:00 +0530 Magnetic Level Indicator float moves with level in external chamber (cage) which is coupled with the tank. Indication display mechanism does not come in direct contact with the liquid media. Special designed cylindrical magnetic float as per density of liquid. Magnetically coupled follower capsule or roller or ball indicates the liquid level externally. Indicator system is consists of bi-colour rollers equipped with magnets mounted on rail inside the housing. As the level starts rising or falling magnetic float also travels with liquid level in non-magnetic chamber. The magnetic interaction between magnets in float and bi-colour rollers causes each roller to rotate 180o. These red / white rollers are visible from long distance, giving a good visual indication visibility. Models are available with side & top mounting designs. Application Liquid, Acids, machines, food, Diesel, Oil, Condensate, Chemicals, Beverages, etc. Features : Visible level changes are shown by the flag display. Compact & easy to install. Rugged, Life long, good visibility. Optional - Level switches for alarm or controlling. Optional - Level transmitters with 4 - 20 mA signal output. SS304, SS 316 & PP version for acid applications https://www.buyflowmeters.com/float-operated-level-transmitter.htm https://www.buyflowmeters.com/float-operated-level-transmitter.htm Wed, 29 Apr 2026 00:00:00 +0530 Level transmitters are reliable and accurate sensors for continuous level indication and control of any liquid, liquid / liquid interface detection, chemically Compatible with the (sensor) material which are intrinsically safe, unaffected by electrical conductivity, temperature, pressure or viscosity The float is designed for variety of liquids and its unique self-cleaning construction is well suited for even sticky or dirty environments with no float hang-ups Multiple alarm relays adjustable option, HART, RS-232, RS-485 options are available The transmitters are Pre-calibrated in the factory. No need of field calibration The accuracy of the transmitter an be as high as 0.1mm  Application : Diesel, Generator facilities, Petrochemical, Condensate, acids, chemical, beverages, milk, juices, oil, cooling tower etc   Features :   Reliable, Maintenance free SS or PP construction Easy to install and operate Explosion Proof certificate available https://www.buyflowmeters.com/capacitance-level-transmitter.htm https://www.buyflowmeters.com/capacitance-level-transmitter.htm Wed, 29 Apr 2026 00:00:00 +0530 Capacitance Level Transmitter is a compact, low cost, level transmitter with 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tanks or storage vessels. Mea-suring range is 0.25 to 3 m for rod probe version. The probe forms an electrical capacitor with the surrounding metal contained wall, or with auxiliary reference probe. With the vessel empty, an initial ca-pacitances exists between the electrode And the metal well or the aux-iliary reference probe.When the probe become covered with material to be measured the capaci-tances will increase and the change will be measured and covered into an analogue (4-20 mil) output signal proportional to the change. Rod or flexible cable can be used for various conductive or non conductive Liquids.Conductive Material: Water based solutions. Acids based etc only insulated probe are suggested Non Conductivity Material: Mostly petrochemical and solvents insulated or non insulated probes can be used https://www.buyflowmeters.com/remote-control-level-transmitter.htm https://www.buyflowmeters.com/remote-control-level-transmitter.htm Thu, 06 Feb 2025 00:00:00 +0530 Ultrasonic Level Remote Transmitter of two wires serial is a sealed transducer best suited for applications where harsh or hazardous environments are a problem. Been made of energy conservation components, It can work be-tween DC 9-32v power supply. Only two wires are enough to supply power and acquire the measured value. LCD display is convenient for onsite setting.   Application: Diesel storage tanks, Water, Storage tanks, waste water treatment, pits, ponds, sewage acids, solvent, juice, beverages etc   Features: Easy Calibration Programming Strong waves LCD display https://www.buyflowmeters.com/mini-magnetic-float-probe-level-switch.htm https://www.buyflowmeters.com/mini-magnetic-float-probe-level-switch.htm Thu, 06 Feb 2025 00:00:00 +0530 Mini Magnetic Probe Level Switch is flexible type, very economical & easy irr stallation, the permanent magnet is sealed into the middle of the specified float ball. The float up and down at the specified position by graduating rings. When the float internal magnet approaches the reed switch, it will ac-tuate the reed switch contact point to create an open or close cir-cuit. Features: Flexible type Very Easy installation Very Economic Application: Clean liquids like-Raw Water, DM Water tanks, Fire Fighting tanks, Flushing tanks, Overhead and UG tanks etc https://www.buyflowmeters.com/reflex-level-gauge.htm https://www.buyflowmeters.com/reflex-level-gauge.htm Sat, 04 Jan 2025 00:00:00 +0530 Reflex Level Gauge are used for measuring the level in the vessel. These can be used for maximum pressure of Upto150kg/cm² and a Maximum temperature of 400 deg C. construconal features include 2.5 Meter single piece construcon with mulple glasses between process Connecon. A pair of auto shut off ball check valves in material ofConstrucon carbon steel or stainless steel and polypropylene as oponal.The principal of reflex level gauges is based on the difference in the refracve Indices of liquid & vapour. The liquid column is contained within the recess Of liquid chamber behind the sight glass which is clamped to the gauge body. The Sight glass has prismac right angled grooves on the side facing the liquid And vapour space light raise entering from right outside the gauge are either Absorbed or reflected depending upon whether they enter the liquid or vapour Space. When the ray of light encounters the surface of one of the grooves in vapour Space, it is reflected to the opposite space appears as silvery white. When the light Ray encounters the surface of grooves in the liquid space, it is totally absorbed Thereby the liquid behind the glass appear black.  https://www.buyflowmeters.com/glass-tube-level-gauge.htm https://www.buyflowmeters.com/glass-tube-level-gauge.htm Tue, 11 Feb 2025 00:00:00 +0530 LFIA Glass Tube Level Gauge is a simple & reliable device for direct reading in atmospheric or pressurized tank ap-plication. Mounted side of the tank through flange or threaded connection. Liquid inside the tank passes through a transparent glass tube & liquid can be viewed through the glass tube and mea-sured by a scale mounted on the gauge. Glass Tube (Borosilicate) is fully Protected by C - Cut frame.These gauges are custom manufactured accord-ing to the C-c distance is avail-able in single length of 2000 mm C-C Distance. We can extend the C-C length by PVC tube.We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request. PP construction is made with all PP isolation valves & internals. https://www.buyflowmeters.com/ss-glass-level-gauge.htm https://www.buyflowmeters.com/ss-glass-level-gauge.htm Tue, 11 Feb 2025 00:00:00 +0530 The level gauge, or sightglass is to liquid level measurement as manometers are to pressure measurement: a very simple and effective technology for direct visual indication of process level. In its simplest form, a level gauge is nothing more than a clear tube through which process liquid may be seen. A tubular level gauge is a simple, reliable, and cost-effective instrument that measures the level of a liquid in a tank or vessel. It's used in low to medium pressure applications and is mounted on the side of the tank https://www.buyflowmeters.com/mechanical-level-indicators.htm https://www.buyflowmeters.com/mechanical-level-indicators.htm Thu, 11 Nov 2021 00:00:00 +0530 https://www.buyflowmeters.com/magnetic-level-gauge.htm https://www.buyflowmeters.com/magnetic-level-gauge.htm Sat, 04 Jan 2025 00:00:00 +0530 Magnetic Bi-Colour Level Gauge float moves with level in external chamber (cage) which is coupled with the tank. Indication display mechanism does not come in direct con-tact with the liquid media. Special designed cylindrical magnetic float as per density of liquid. Magnetically cou-pled follower capsule or roller or ball indicates the liquid level externally. Indicator system is consists of bi-colour rollers equipped with magnets mounted on rail inside the housing. As the level starts rising or falling magnetic float also travels with liquid level in non-magnetic chamber. The magnetic in-teraction between magnets in float and Ed-colour rollers causes each roller to rotate 180o. These red / white rollers are visible from long distance, giving a good visual indi-cation visibility. Models are available with side & top mounting designs. https://www.buyflowmeters.com/float-board-level-indicator.htm https://www.buyflowmeters.com/float-board-level-indicator.htm Thu, 06 Feb 2025 00:00:00 +0530 This type of float & Board type level gauge/indicator basically works on the principle of buoyancy. The float is well connected to the counterweight along with a pointer through flexible wire ropes. The pointer slides along the guide against a graduated scale to indicate corresponding levels inside the tank. We are renowned organizations of market for presenting the optimum quality range of Float & Board Level Indicator. Suitable for overhead / underground / large storage tanks. continuous level indication without power supply.    https://www.buyflowmeters.com/4-point-digital-indicator-cum-controller-with-buzzer.htm https://www.buyflowmeters.com/4-point-digital-indicator-cum-controller-with-buzzer.htm Thu, 06 Feb 2025 00:00:00 +0530 4 Point Level Indicators with Controller & Buzzer works fully automatically. When water level in the overhead tank falls below the lower sensor, pump will automatically start, and keep the running till water level reaches the upper Sensor, and switch off the pump when tank will full. Suitable for Jet PUmps, Mono Block Pumps, Submersible Pumps with single Phase. 4 Point Level Indicators with Controller & Buzzer works fully automatically. When water level in the overhead tank falls below the lower sensor, pump will automatically start, and keep the running till water level reaches the upper Sensor, and switch off the pump when tank will full. Suitable for Jet PUmps, Mono Block Pumps, Submersible Pumps with single Phase.  https://www.buyflowmeters.com/temperature-sensor.htm https://www.buyflowmeters.com/temperature-sensor.htm Wed, 29 Apr 2026 00:00:00 +0530 LFIA make offering wide range of Temperature Transmitter for general purpose to demanding Application these are available in 2 wire or 3 wire Configuration, the variety of sheathing makes it Suitable for most critical appli-cations. The transmitter is a two wire device, and is fully configurable by the user, over a wide temperature range, with the aid of a simple push button. The trans-mitters advanced circuitry guaranties high stability over the wide operating ambient temperature ranges experienced by head mounted devices. Application: Water, Air, Diesel, Power, Steel, Chemical, Automobile, Food and beverages industries etc https://www.buyflowmeters.com/hopper-level-sensor.htm https://www.buyflowmeters.com/hopper-level-sensor.htm Wed, 29 Apr 2026 00:00:00 +0530 Hopper Level Sensor is used to drive the vibration fork and feedback signal, when produces the resonation on the fork. When the fork comes into contact with material, the fork will release some frequency signal. It will be converted into the output to the signal. The vibrating frequency causes tuning forks to vibrate free inside the tank when forks are not covered with any media. Once the media covers the tuning forks, it causes damp-ing of vibrations. The damping effect of vi-brating forks is sensed by an equal circuitry which in turns gives an output electronic signal which in turn actuates a relay. https://www.buyflowmeters.com/cod-bod-tss-ph-water-analyzer.htm https://www.buyflowmeters.com/cod-bod-tss-ph-water-analyzer.htm Sat, 04 Jan 2025 00:00:00 +0530 Both COD and BOD testing methods are designed to indicate the amount of contamination in a water sample. COD is the amount of oxygen required to chemically break down contaminants, while BOD is the amount of oxygen required for biodegradation by microorganisms. https://www.buyflowmeters.com/bucket-strainer.htm https://www.buyflowmeters.com/bucket-strainer.htm Sat, 04 Jan 2025 00:00:00 +0530 A Bucket t strainer is a device that uses a mesh screen to filter out foreign particles in a horizontal pipeline. These particles are then removed from the strainer and will not make their way into downstream equipment like pumps, valves, and traps. Read the following to learn more about bucket strainers, how they work, and how to choose the best strainer for your application. Bucket strainers are installed to protect equipment from damage caused by unwanted debris that may be in the pipeline. The unwanted debris could be dirt or other foreign particles that make their way into the process fluid. Typically, basket strainers are installed in horizontal pipelines and in situations where high flow capacity is required. These strainers are installed upstream of equipment like pumps, control valves, and traps, keeping potentially corrosive or damaging debris from making its way down the line. They can be installed alone or in a series to increase filtration. They may come with a single chamber (simplex strainers) or multiple chambers (multiplex strainers). To read more about the differences between simplex and duplex strainers https://www.buyflowmeters.com/lcd-data-logger.htm https://www.buyflowmeters.com/lcd-data-logger.htm Sat, 04 Jan 2025 00:00:00 +0530  dual channel data loggers with built-in temperature and relative humidity sensors. They use a high quality industrial grade humidity sensor for accurate and reliable operation in applications such as transportation, food and goods storage, process auditing, pharmaceutical, HVAC and others. They can be easily programmed and set via a handy infrared IR-LINK 3 interface connected to a USB port under Windows® software or with a PalmOS compatible PDA IrDA interface. LogChart II software allows for logger configuration, recorded data retrieval, plotting, historical analysis and it exports data to spread sheets. Temperature and humidity values are shown in the digital display. You can also check on the display the Minimum and maximum recorded values. https://www.buyflowmeters.com/mechanical-water-flow-meter.htm https://www.buyflowmeters.com/mechanical-water-flow-meter.htm Thu, 06 Feb 2025 00:00:00 +0530 A mechanical flow meter is a precise instrument designed to measure the total flow of a liquid. It utilizes mechanical components, like gears, rotors, impellers, or turbines, which move in response to the fluid flowing through themWoltman type water meter. . Removable element structure. . easy installation & maintenance. . flange standard can be choose.     https://www.buyflowmeters.com/digital-process-indicator-universal.htm https://www.buyflowmeters.com/digital-process-indicator-universal.htm Thu, 06 Feb 2025 00:00:00 +0530 Digital Indicator are basically universal microprocessor based designed to fulfil the requirement of accurate Measurement and display of various electrical parameters in Process Industries like Level, temperature, pressure, etc. 7 segment LED display, Measuring range & other parameters can be easily calibrated by push buttons. Relay outputs is also available. It can be interfaced with SCADA/PLC using analog retransmission output for process automation. Digital Indicator are basically universal microprocessor based designed to fulfil the requirement of accurate Measurement and display of various electrical parameters in Process Industries like Level, temperature, pressure, etc. 7 segment LED display, Measuring range & other parameters can be easily calibrated by push buttons. Relay outputs is also available. It can be interfaced with SCADA/PLC using analog retransmission output for process automation. https://www.buyflowmeters.com/ultrasonic-level-transmitters.htm https://www.buyflowmeters.com/ultrasonic-level-transmitters.htm Thu, 11 Nov 2021 00:00:00 +0530 https://www.buyflowmeters.com/rotating-paddle-level-switch.htm https://www.buyflowmeters.com/rotating-paddle-level-switch.htm Thu, 06 Feb 2025 00:00:00 +0530 Rotary paddle type level switch is a level measuring instrument used to detect solid application media. These types of rotating paddle is suitable for level detection in Storage Tanks, Bin Hoppers, and containers to avoid overspill and material loss. Universal Power Supply: 90-265 V AC & 24-55 V DC Application Temperature Range : up to 200° C Outputs: DPDT Relay, SPDT Relay Rope probe available for longer lengths Adjustable RPM and adjustable switching sensitivity Motor fault indication Foldable paddle mechanism for ease of installation 2 potential free contacts with adjustable time delay https://www.buyflowmeters.com/intelligent-level-switch.htm https://www.buyflowmeters.com/intelligent-level-switch.htm Thu, 06 Feb 2025 00:00:00 +0530 Intelligent Level Switch used for high, low position alarm in production process tank or pipelines. The compact design to facilitate carrying and transporting, and can be quickly installed even in the area of narrow space or difficult operation. Suitable for use in the CIP and SIP cleaning applications, the surface roughness (Ra) level can be adjusted according to customer's needs, suitable for use in pharmaceutical and food processing industry applications.   LFIA microwave RF admittance microwave level switch gererate Alarm when present microwave frequency and medium microwave frequency match, Microwave fied generate when measuring point inserting few millimeters in the medium, also its not effect by foam condensate and residue,also its measuring point has no dead end and is hygienic so level switch is suitable for CIP (clean-in-place), WIP (wash-in-place) and SIP (sterilization-in-place), availble with different process connection as per industries requirement, and different tempersture version for set up to 200 deg c. https://www.buyflowmeters.com/water-meters.htm https://www.buyflowmeters.com/water-meters.htm Fri, 05 Nov 2021 00:00:00 +0530 https://www.buyflowmeters.com/removable-element-woltman-cold-hot-water-meter.htm https://www.buyflowmeters.com/removable-element-woltman-cold-hot-water-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 It is dismountable and its movement can be pulled out easily for repair and exchange without taking the meter from pipe. (The recorder can be replaced on condition that water is available) The recorder is sealed up so that readings are over clear. Measuring devices are general – purpose and can reduce alternate parts. Its parts are connected magnetically and work numbly and reliably because of slight obstruction. The pressure loss is small. It is durable. https://www.buyflowmeters.com/multi-jet-vane-wheel-type-dry-dial-brass-body-water-meter.htm https://www.buyflowmeters.com/multi-jet-vane-wheel-type-dry-dial-brass-body-water-meter.htm Thu, 06 Feb 2025 00:00:00 +0530  one amidst the forefront Dry Type Removable DOMESTIC MULTIJET Water Meter Manufacturer,Exporter & Supplier, based in India. The Woltmann Water Meter is widely demanded in the market due to the unmatched quality and unsurpassable performance. Further to meet the specific requirements of the application, we also provide Horizontal Woltmann Water Meter loaded with advance configurations.Features: Removable mechanism, easy installation without recalibration High quality material for accurate performance Technical data conforms to International standard ISO 4064, Class B Suitable for Cold Water (50 deg C) / Hot Water (90 deg C) https://www.buyflowmeters.com/hydraulic-flow-meter.htm https://www.buyflowmeters.com/hydraulic-flow-meter.htm Sat, 04 Jan 2025 00:00:00 +0530 A flow meter is a method of measuring the volume of a liquid as it passes a fixed point on a pipe or tube. Measurements are taken in liters per minute or gallons per minute. They measure linear, nonlinear, mass, or volume of a liquid’s flow rate. The key factors that hydraulic engineers watch are flow and pressure to get an accurate and precise measurement of a system. The main function of a hydraulic flow meter is to determine the efficiency and accuracy of the systems operation and performance. The term hydraulic flow meter is a generic method for describing a hydraulic flow measuring device. Since hydraulic fluids come in different viscosities and with different flow rates, hydraulic flow meters are adjusted and produced to fit the conditions of the type of fluid they are measuring. A hydraulic flow meter can be positioned in any part of a hydraulic line to identify the flow rate. Since not every hydraulic system is the same, there are flow meters with varying port sizes to fit different systems. The meter itself has three main parts, which are the device, a transducer, and transmitter. The transducer on a hydraulic flow meter measures the velocity of the liquid. They can calculate the flow level or the amount of flow. The transducer senses the passage of the flow through the measuring device and sends a signal to the transmitter. The volume of the flow is proportional to the cross sectional area and the fluid velocity with the mass flow being proportional to the density and volume of the fluid. The data from the calculations appears on the hydraulic flow meter gauge. https://www.buyflowmeters.com/split-keypad-prepaid-water-meter.htm https://www.buyflowmeters.com/split-keypad-prepaid-water-meter.htm Thu, 06 Feb 2025 00:00:00 +0530 you have been looking for the best Flow Meter from top dealers? Don’t look any further because at L&T-SuFin you can find the best brands for Flow Meter at best price in India. Buy Flow Meter online on India’s leading marketplace for industrial tools, construction materials, electrical and equipment. Expect high quality from top suppliers for high performance and great durability. We offer you Flow Meter at genuine wholesale rates with great discounts and avail quotations for bulk purchases. Request Quotations for Flow Meter from verified sellers and benefit from avail Logistics and Financing options. https://www.buyflowmeters.com/flow-switch.htm https://www.buyflowmeters.com/flow-switch.htm Thu, 06 Feb 2025 00:00:00 +0530 Electromechanical flow switch designed for “no flow” detection of water or any non-corrosive liquids entering industrial chillers, heaters or any commercial flow lines. The signal from the flow switch is been used for operational controls that prevents system failure. Flow Switch is an economical flow switch that comes with a plastic cover and IP30 protection to prevent accidental intrusions. Flow Switch is equipped with high quality UL certified micro switch and protective bellows to ensure high endurance with durable operation and long service life. The flow range options with line sizes from 25 … 150 NB enables for variable applications to detect the flow in non-critical areas. https://www.buyflowmeters.com/digital-indicator-controller.htm https://www.buyflowmeters.com/digital-indicator-controller.htm Mon, 15 Nov 2021 00:00:00 +0530 https://www.buyflowmeters.com/2-point-digital-indicator-cum-controller.htm https://www.buyflowmeters.com/2-point-digital-indicator-cum-controller.htm Wed, 29 Apr 2026 00:00:00 +0530 Level controller & indicator using best quality compo-nents and high end technology, this controller ensures best perfor-mance. We are committed to manufacture, export and supply our clients a superior quality assortment of Auto Water Level Controller that works fully automatically. Available in various specifications as per the specific needs of the customers, this Auto Level Controller & indicator is available at highly competitive prices to the clients. https://www.buyflowmeters.com/pressure-temperature-transmitter.htm https://www.buyflowmeters.com/pressure-temperature-transmitter.htm Mon, 15 Nov 2021 00:00:00 +0530 https://www.buyflowmeters.com/pressure-sensor.htm https://www.buyflowmeters.com/pressure-sensor.htm Tue, 11 Feb 2025 00:00:00 +0530 The functional principle of a resistive Pressure Transmitter is very simple. The pressure sensor converts the mechanical pressure value into a proportional electrical signal. The pressure sensor typically consists of a stable main body and a (thin) diaphragm. PT Series features an all-welded stainless steel measuring cell for improved media compatibility. There are no internal soft sealing ma-terials that may react with the media or iorate over time. The compact case is also made of stainles d is available with environmental protection ratings.Application: Water, Air, HVAC, Diesel, Power, Steel, Chemmical, Automobile, Food and beverages Industries etc Features: Stainless Steel wetted parts Small Compact design